Signed-off-by: Dmitri Gekhtman <[email protected]> Signed-off-by: Dmitri Gekhtman <[email protected]>
9.5 KiB
Ray Services (alpha)
Note: This is the alpha version of Ray Services. There will be ongoing improvements for Ray Services in the future releases.
Prerequisites
- Ray 2.0 or newer.
- KubeRay 0.3.0 or newer.
What is a RayService?
A RayService manages 2 things:
- Ray Cluster: Manages resources in a Kubernetes cluster.
- Ray Serve Deployment Graph: Manages users' deployment graphs.
What does the RayService provide?
- Kubernetes-native support for Ray clusters and Ray Serve deployment graphs. After using a Kubernetes config to define a Ray cluster and its Ray Serve deployment graphs, you can use
kubectlto create the cluster and its graphs. - In-place update for Ray Serve deployment graph. Users can update the Ray Serve deployment graph config in the RayService CR config and use
kubectl applyto update the deployment graph. - Zero downtime upgrade for Ray clusters. Users can update the Ray cluster config in the RayService CR config and use
kubectl applyto update the cluster. RayService will temporarily create a pending cluster and wait for it to be ready, then switch traffic to the new cluster and terminate the old one. - Services HA. RayService will monitor the Ray cluster and Serve deployments' health statuses. If RayService detects an unhealthy status for a period of time, RayService will try to create a new Ray cluster and switch traffic to the new cluster when it is ready.
Deploy the Operator
$ kubectl create -k "github.com/ray-project/kuberay/ray-operator/config/default?ref=v0.4.0&timeout=90s"
Check that the controller is running.
$ kubectl get deployments -n ray-system
NAME READY UP-TO-DATE AVAILABLE AGE
ray-operator 1/1 1 1 40s
$ kubectl get pods -n ray-system
NAME READY STATUS RESTARTS AGE
ray-operator-75dbbf8587-5lrvn 1/1 Running 0 31s
Run an Example Cluster
An example config file to deploy RayService is included here: ray_v1alpha1_rayservice.yaml
# Create a ray service and deploy fruit deployment graph.
$ kubectl apply -f config/samples/ray_v1alpha1_rayservice.yaml
# List running RayServices.
$ kubectl get rayservice
NAME AGE
rayservice-sample 7s
# The created RayService should include a head pod, a worker pod, and four services.
$ kubectl get pods
NAME READY STATUS RESTARTS AGE
ervice-sample-raycluster-qd2vl-worker-small-group-bxpp6 1/1 Running 0 24m
rayservice-sample-raycluster-qd2vl-head-45hj4 1/1 Running 0 24m
$ kubectl get services
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
kubernetes ClusterIP 10.100.0.1 <none> 443/TCP 62d
# A head node service maintained by the RayService.
rayservice-sample-head-svc ClusterIP 10.100.34.24 <none> 6379/TCP,8265/TCP,10001/TCP,8000/TCP,52365/TCP 24m
# A dashboard agent service maintained by the RayCluster.
rayservice-sample-raycluster-qd2vl-dashboard-svc ClusterIP 10.100.109.177 <none> 52365/TCP 24m
# A head node service maintained by the RayCluster.
rayservice-sample-raycluster-qd2vl-head-svc ClusterIP 10.100.180.221 <none> 6379/TCP,8265/TCP,10001/TCP,8000/TCP,52365/TCP 24m
# A serve service maintained by the RayService.
rayservice-sample-serve-svc ClusterIP 10.100.39.92 <none> 8000/TCP 24m
Note: Default ports and their definitions.
| Port | Definition |
|---|---|
| 6379 | Ray GCS |
| 8265 | Ray Dashboard |
| 10001 | Ray Client |
| 8000 | Ray Serve |
| 52365 | Ray Dashboard Agent |
Get information about the RayService using its name.
$ kubectl describe rayservices rayservice-sample
Access User Services
The users' traffic can go through the serve service (e.g. rayservice-sample-serve-svc).
Run a Curl Pod
$ kubectl run curl --image=radial/busyboxplus:curl -i --tty
Or if you already have a curl pod running, you can login using kubectl exec -it curl sh.
For the fruit example deployment, you can try the following request:
[ root@curl:/ ]$ curl -X POST -H 'Content-Type: application/json' rayservice-sample-serve-svc.default.svc.cluster.local:8000 -d '["MANGO", 2]'
> 6
You should get the response 6.
Use Port Forwarding
Set up Kubernetes port forwarding.
$ kubectl port-forward service/rayservice-sample-serve-svc 8000
For the fruit example deployment, you can try the following request:
[ root@curl:/ ]$ curl -X POST -H 'Content-Type: application/json' localhost:8000 -d '["MANGO", 2]'
> 6
Note:
serve-svcis HA in general. It will do traffic routing among all the workers which have serve deployments and will always try to point to the healthy cluster, even during upgrading or failing cases. You can setserviceUnhealthySecondThresholdto define the threshold of seconds that the serve deployments fail. You can also setdeploymentUnhealthySecondThresholdto define the threshold of seconds that Ray fails to deploy any serve deployments.
Access Ray Dashboard
Set up Kubernetes port forwarding for the dashboard.
$ kubectl port-forward service/rayservice-sample-head-svc 8265
Access the dashboard using a web browser at localhost:8265.
Update Ray Serve Deployment Graph
You can update the serveConfig in your RayService config file.
For example, update the price of mangos to 4 in ray_v1alpha1_rayservice.yaml:
- name: MangoStand
numReplicas: 1
userConfig: |
price: 4
Use kubectl apply to update your RayService and kubectl describe rayservices rayservice-sample to take a look at the RayService's information. It should look similar to:
serveDeploymentStatuses:
- healthLastUpdateTime: "2022-07-18T21:51:37Z"
lastUpdateTime: "2022-07-18T21:51:41Z"
name: MangoStand
status: UPDATING
After it finishes deployment, let's send a request again. In the curl pod from earlier, run:
[ root@curl:/ ]$ curl -X POST -H 'Content-Type: application/json' rayservice-sample-serve-svc.default.svc.cluster.local:8000 -d '["MANGO", 2]'
> 8
Or if using port forwarding:
curl -X POST -H 'Content-Type: application/json' localhost:8000 -d '["MANGO", 2]'
> 8
You should now get 8 as a result.
Upgrade RayService RayCluster Config
You can update the rayClusterConfig in your RayService config file.
For example, you can increase the number of workers to 2:
workerGroupSpecs:
# the pod replicas in this group typed worker
- replicas: 2
Use kubectl apply to update your RayService and kubectl describe rayservices rayservice-sample to take a look at the RayService's information. It should look similar to:
pendingServiceStatus:
appStatus: {}
dashboardStatus:
healthLastUpdateTime: "2022-07-18T21:54:53Z"
lastUpdateTime: "2022-07-18T21:54:54Z"
rayClusterName: rayservice-sample-raycluster-bshfr
rayClusterStatus: {}
You can see the RayService is preparing a pending cluster. Once the pending cluster is healthy, the RayService will make it the active cluster and terminate the previous one.
RayService Observability
You can use kubectl logs to check the operator logs or the head/worker nodes logs.
You can also use kubectl describe rayservices rayservice-sample to check the states and event logs of your RayService instance.
For Ray Serve monitoring, you can refer to the Ray observability documentation.
To run Ray state APIs, log in to the head pod by running kubectl exec -it <head-node-pod> bash and use the Ray CLI or you can run commands locally using kubectl exec -it <head-node-pod> -- <ray state api>.
For example, kubectl exec -it <head-node-pod> -- ray summary tasks outputs the following:
======== Tasks Summary: 2022-07-28 15:10:24.801670 ========
Stats:
------------------------------------
total_actor_scheduled: 17
total_actor_tasks: 5
total_tasks: 0
Table (group by func_name):
------------------------------------
FUNC_OR_CLASS_NAME STATE_COUNTS TYPE
0 ServeController.listen_for_change RUNNING: 5 ACTOR_TASK
1 ServeReplica:MangoStand.__init__ FINISHED: 3 ACTOR_CREATION_TASK
2 HTTPProxyActor.__init__ FINISHED: 2 ACTOR_CREATION_TASK
3 ServeReplica:PearStand.__init__ FINISHED: 3 ACTOR_CREATION_TASK
4 ServeReplica:OrangeStand.__init__ FINISHED: 3 ACTOR_CREATION_TASK
5 ServeReplica:FruitMarket.__init__ FINISHED: 3 ACTOR_CREATION_TASK
6 ServeReplica:DAGDriver.__init__ FINISHED: 2 ACTOR_CREATION_TASK
7 ServeController.__init__ FINISHED: 1 ACTOR_CREATION_TASK
Delete the RayService Instance
$ kubectl delete -f config/samples/ray_v1alpha1_rayservice.yaml
Delete the Operator
$ kubectl delete -k "github.com/ray-project/kuberay/ray-operator/config/default"