* Add command to run tests in persistent mode
* Convert Suspense fuzz tester to use noop renderer
So we can run it in persistent mode, too.
* Don't mutate stateNode in appendAllChildren
We can't mutate the stateNode in appendAllChildren because the children
could be current.
This is a bit weird because now the child that we append is different
from the one on the fiber stateNode. I think this makes conceptual
sense, but I suspect this likely breaks an assumption in Fabric.
With this approach, we no longer need to clone to unhide the children,
so I removed those host config methods.
Fixes bug surfaced by fuzz tester. (The test case that failed was the
one that's already hard coded.)
* In persistent mode, disable test that reads a ref
Refs behave differently in persistent mode. I added a TODO to write
a persistent mode version of this test.
* Run persistent mode tests in CI
* test-persistent should skip files without noop
If a file doesn't reference react-noop-renderer, we shouldn't bother
running it in persistent mode, since the results will be identical to
the normal test run.
* Remove module constructor from placeholder tests
We don't need this now that we have the ability to run any test file in
either mutation or persistent mode.
* Revert "test-persistent should skip files without noop"
Seb objected to adding shelljs as a dep and I'm too lazy to worry about
Windows support so whatever I'll just revert this.
* Delete duplicate file
* Swap expect(ReactNoop) for expect(Scheduler)
In the previous commits, I upgraded our custom Jest matchers for the
noop and test renderers to use Scheduler under the hood.
Now that all these matchers are using Scheduler, we can drop
support for passing ReactNoop and test roots and always pass
Scheduler directly.
* Externalize Scheduler in noop and test bundles
I also noticed we don't need to regenerator runtime in noop anymore.
* Replace test renderer's fake Scheduler implementation with mock build
The test renderer has its own mock implementation of the Scheduler
interface, with the ability to partially render work in tests. Now that
this functionality has been lifted into a proper mock Scheduler build,
we can use that instead.
* Fix Profiler tests in prod
* Replace noop's fake Scheduler implementation with mock Scheduler build
The noop renderer has its own mock implementation of the Scheduler
interface, with the ability to partially render work in tests. Now that
this functionality has been lifted into a proper mock Scheduler build,
we can use that instead.
Most of the existing noop tests were unaffected, but I did have to make
some changes. The biggest one involved passive effects: previously, they
were scheduled on a separate queue from the queue that handles
rendering. After this change, both rendering and effects are scheduled
in the Scheduler queue. I think this is a better approach because tests
no longer have to worry about the difference; if you call `flushAll`,
all the work is flushed, both rendering and effects. But for those few
tests that do care to flush the rendering without the effects, that's
still possible using the `yieldValue` API.
Follow-up: Do the same for test renderer.
* Fix import to scheduler/unstable_mock
* Add new mock build of Scheduler with flush, yield API
Test environments need a way to take control of the Scheduler queue and
incrementally flush work. Our current tests accomplish this either using
dynamic injection, or by using Jest's fake timers feature. Both of these
options are fragile and rely too much on implementation details.
In this new approach, we have a separate build of Scheduler that is
specifically designed for test environments. We mock the default
implementation like we would any other module; in our case, via Jest.
This special build has methods like `flushAll` and `yieldValue` that
control when work is flushed. These methods are based on equivalent
methods we've been using to write incremental React tests. Eventually
we may want to migrate the React tests to interact with the mock
Scheduler directly, instead of going through the host config like we
currently do.
For now, I'm using our custom static injection infrastructure to create
the two builds of Scheduler — a default build for DOM (which falls back
to a naive timer based implementation), and the new mock build. I did it
this way because it allows me to share most of the implementation, which
isn't specific to a host environment — e.g. everything related to the
priority queue. It may be better to duplicate the shared code instead,
especially considering that future environments (like React Native) may
have entirely forked implementations. I'd prefer to wait until the
implementation stabilizes before worrying about that, but I'm open to
changing this now if we decide it's important enough.
* Mock Scheduler in bundle tests, too
* Remove special case by making regex more restrictive
* Throw in tests if work is done before emptying log
Test renderer already does this. Makes it harder to miss unexpected
behavior by forcing you to assert on every logged value.
* Convert ReactNoop tests to use jest matchers
The matchers warn if work is flushed while the log is empty. This is
the pattern we already follow for test renderer. I've used the same APIs
as test renderer, so it should be easy to switch between the two.
* Improve release script process documentation
* Improved pre-publish instructions/message based on feedback
* Added reminder to attach build artifacts to GitHub release
* Memoize promise listeners to prevent exponential growth
Previously, React would attach a new listener every time a promise is
thrown, regardless of whether the same listener was already attached
during a previous render. Because React attempts to render every time
a promise resolves, the number of listeners grows quickly.
This was especially bad in synchronous mode because the renders that
happen when the promise pings are not batched together. So if a single
promise has multiple listeners for the same root, there will be multiple
renders, which in turn results in more listeners being added to the
remaining unresolved promises. This results in exponential growth in
the number of listeners with respect to the number of IO-bound
components in a single render.
Fixes#14220
* Memoize on the root and Suspense fiber instead of on the promise
* Add TODO to fix persistent mode tests
* [Fizz] Add Flow/Jest/Rollup build infra
Add a new package for react-stream which allows for custom server renderer
outputs. I picked the name because it's a reasonable name but also
because the npm name is currently owned by a friend of the project.
The react-dom build has its own inlined server renderer under the
name `react-dom/fizz`.
There is also a noop renderer to be used for testing. At some point
we might add a public one to test-renderer but for now I don't want to have
to think about public API design for the tests.
* Add FormatConfig too
We need to separate the format (DOM, React Native, etc) from the host
running the server (Node, Browser, etc).
* Basic wiring between Node, Noop and DOM configs
The Node DOM API is pipeToNodeStream which accepts a writable stream.
* Merge host and format config in dynamic react-stream entry point
Simpler API this way but also avoids having to fork the wrapper config.
Fixes noop builds.
* Add setImmediate/Buffer globals to lint config
Used by the server renderer
* Properly include fizz.node.js
Also use forwarding to it from fizz.js in builds so that tests covers
this.
* Make react-stream private since we're not ready to publish
or even name it yet
* Rename Renderer -> Streamer
* Prefix react-dom/fizz with react-dom/unstable-fizz
* Add Fizz Browser host config
This lets Fizz render to WHATWG streams. E.g. for rendering in a
Service Worker.
I added react-dom/unstable-fizz.browser as the entry point for this.
Since we now have two configurations of DOM. I had to add another
inlinedHostConfigs configuration called `dom-browser`. The reconciler
treats this configuration the same as `dom`. For stream it checks
against the ReactFizzHostConfigBrowser instead of the Node one.
* Add Fizz Browser Fixture
This is for testing server rendering - on the client.
* Lower version number to detach it from react-reconciler version
* BUG: ReactPartialRenderer / New Context polutes mutable global state
The new context API stores the provided values on the shared context instance. When used in a synchronous context, this is not an issue. However when used in an concurrent context this can cause a "push provider" from one react render to have an effect on an unrelated concurrent react render.
I've encountered this bug in production when using renderToNodeStream, which asks ReactPartialRenderer for bytes up to a high water mark before yielding. If two Node Streams are created and read from in parallel, the state of one can polute the other.
I wrote a failing test to illustrate the conditions under which this happens.
I'm also concerned that the experimental concurrent/async React rendering on the client could suffer from the same issue.
* Use unique thread ID for each partial render to access Context
This first adds an allocator that keeps track of a unique ThreadID index
for each currently executing partial renderer. IDs are not just growing
but are reused as streams are destroyed.
This ensures that IDs are kept nice and compact.
This lets us use an "array" for each Context object to store the current
values. The look up for these are fast because they're just looking up
an offset in a tightly packed "array".
I don't use an actual Array object to store the values. Instead, I rely
on that VMs (notably V8) treat storage of numeric index property access
as a separate "elements" allocation.
This lets us avoid an extra indirection.
However, we must ensure that these arrays are not holey to preserve this
feature.
To do that I store the _threadCount on each context (effectively it takes
the place of the .length property on an array).
This lets us first validate that the context has enough slots before we
access the slot. If not, we fill in the slots with the default value.
* Parse build script type and package names
This ensures that `yarn build core dom` includes DOM.
It also ensures that spaces like `yarn build "core, dom"` doesn't build EVERYTHING.
* Get rid of label in bundles config
Instead we just use the name from entry using fuzzy search.
There is one special case. If you put in `/index` or `/index.js`.
That allows to build things like `react/index` to only build isomorphic
where as `react` would build everything. Or `react-dom/index` to exclude
the server renderers.
* Instead of matching `/index.js` just append it to the search string
That way things like `yarn build react/` works too.
