SO_OOBINLINE option is set/get as boolean value, which is the same as linux.
As we currently do not support disabling this option, we always return it as
true.
PiperOrigin-RevId: 347413905
tcpip.ControlMessages can not contain Linux specific structures which makes it
painful to convert back and forth from Linux to tcpip back to Linux when passing
around control messages in hostinet and raw sockets.
Now we convert to the Linux version of the control message as soon as we are
out of tcpip.
PiperOrigin-RevId: 347027065
This change lets us split the v4 stats from the v6 stats, which will be
useful when adding stats for each network endpoint.
PiperOrigin-RevId: 345322615
Moved AddressAndFamily() and ConvertAddress() to socket package from netstack.
This helps because these utilities are used by sibling netstack packages.
Such sibling dependencies can later cause circular dependencies. Common utils
shared between siblings should be moved up to the parent.
PiperOrigin-RevId: 345275571
Ports the following options:
- TCP_NODELAY
- TCP_CORK
- TCP_QUICKACK
Also deletes the {Get/Set}SockOptBool interface methods from all implementations
PiperOrigin-RevId: 344378824
We will use SocketOptions for all kinds of options, not just SOL_SOCKET options
because (1) it is consistent with Linux which defines all option variables on
the top level socket struct, (2) avoid code complexity. Appropriate checks
have been added for matching option level to the endpoint type.
Ported the following options to this new utility:
- IP_MULTICAST_LOOP
- IP_RECVTOS
- IPV6_RECVTCLASS
- IP_PKTINFO
- IP_HDRINCL
- IPV6_V6ONLY
Changes in behavior (these are consistent with what Linux does AFAICT):
- Now IP_MULTICAST_LOOP can be set for TCP (earlier it was a noop) but does not
affect the endpoint itself.
- We can now getsockopt IP_HDRINCL (earlier we would get an error).
- Now we return ErrUnknownProtocolOption if SOL_IP or SOL_IPV6 options are used
on unix sockets.
- Now we return ErrUnknownProtocolOption if SOL_IPV6 options are used on non
AF_INET6 endpoints.
This change additionally makes the following modifications:
- Add State() uint32 to commonEndpoint because both tcpip.Endpoint and
transport.Endpoint interfaces have it. It proves to be quite useful.
- Gets rid of SocketOptionsHandler.IsListening(). It was an anomaly as it was
not a handler. It is now implemented on netstack itself.
- Gets rid of tcp.endpoint.EndpointInfo and directly embeds
stack.TransportEndpointInfo. There was an unnecessary level of embedding
which served no purpose.
- Removes some checks dual_stack_test.go that used the errors from
GetSockOptBool(tcpip.V6OnlyOption) to confirm some state. This is not
consistent with the new design and also seemed to be testing the
implementation instead of behavior.
PiperOrigin-RevId: 344354051
This changes also introduces:
- `SocketOptionsHandler` interface which can be implemented by endpoints to
handle endpoint specific behavior on SetSockOpt. This is analogous to what
Linux does.
- `DefaultSocketOptionsHandler` which is a default implementation of the above.
This is embedded in all endpoints so that we don't have to uselessly
implement empty functions. Endpoints with specific behavior can override the
embedded method by manually defining its own implementation.
PiperOrigin-RevId: 343158301
This change also makes the following fixes:
- Make SocketOptions use atomic operations instead of having to acquire/drop
locks upon each get/set option.
- Make documentation more consistent.
- Remove tcpip.SocketOptions from socketOpsCommon because it already exists
in transport.Endpoint.
- Refactors get/set socket options tests to be easily extendable.
PiperOrigin-RevId: 343103780
Fixes the behaviour of SO_ERROR for tcp sockets where in linux it returns
sk->sk_err and if sk->sk_err is 0 then it returns sk->sk_soft_err. In gVisor TCP
we endpoint.HardError is the equivalent of sk->sk_err and endpoint.LastError
holds soft errors. This change brings this into alignment with Linux such that
both hard/soft errors are cleared when retrieved using getsockopt(.. SO_ERROR)
is called on a socket.
Fixes#3812
PiperOrigin-RevId: 342868552
Store all the socket level options in a struct and call {Get/Set}SockOpt on
this struct. This will avoid implementing socket level options on all
endpoints. This CL contains implementing one socket level option for tcp and
udp endpoints.
PiperOrigin-RevId: 342203981
Inode number consistency checks are now skipped in save/restore tests for
reasons described in greatest detail in StatTest.StateDoesntChangeAfterRename.
They pass in VFS1 due to the bug described in new test case
SimpleStatTest.DifferentFilesHaveDifferentDeviceInodeNumberPairs.
Fixes#1663
PiperOrigin-RevId: 338776148
Added the following fields in kernfs.InodeAttr:
- blockSize
- atime
- mtime
- ctime
Also resolved all TODOs for #1193.
Fixes#1193
PiperOrigin-RevId: 338714527
The SO_ACCEPTCONN option is used only on getsockopt(). When this option is
specified, getsockopt() indicates whether socket listening is enabled for
the socket. A value of zero indicates that socket listening is disabled;
non-zero that it is enabled.
PiperOrigin-RevId: 338703206
Adds support for the IPv6-compatible redirect target. Redirection is a limited
form of DNAT, where the destination is always the localhost.
Updates #3549.
PiperOrigin-RevId: 334698344
As per relevant IP RFCS (see code comments), broadcast (for IPv4) and
multicast addresses are not allowed. Currently checks for these are
done at the transport layer, but since it is explicitly forbidden at
the IP layers, check for them there.
This change also removes the UDP.InvalidSourceAddress stat since there
is no longer a need for it.
Test: ip_test.TestSourceAddressValidation
PiperOrigin-RevId: 334490971
Like matchers, targets should use a module-like register/lookup system. This
replaces the brittle switch statements we had before.
The only behavior change is supporing IPT_GET_REVISION_TARGET. This makes it
much easier to add IPv6 redirect in the next change.
Updates #3549.
PiperOrigin-RevId: 334469418
VFS2 socket record is not removed from the system-wide
socket table when the socket is released, which will lead
to a memory leak. This patch fixes this issue.
Fixes: #3874
Signed-off-by: Tiwei Bie <[email protected]>
SO_LINGER is a socket level option and should be stored on all endpoints even
though it is used to linger only for TCP endpoints.
PiperOrigin-RevId: 332369252
The existing implementation for TransportProtocol.{Set}Option take
arguments of an empty interface type which all types (implicitly)
implement; any type may be passed to the functions.
This change introduces marker interfaces for transport protocol options
that may be set or queried which transport protocol option types
implement to ensure that invalid types are caught at compile time.
Different interfaces are used to allow the compiler to enforce read-only
or set-only socket options.
RELNOTES: n/a
PiperOrigin-RevId: 330559811
Accept on gVisor will return an error if a socket in the accept queue was closed
before Accept() was called. Linux will return the new fd even if the returned
socket is already closed by the peer say due to a RST being sent by the peer.
This seems to be intentional in linux more details on the github issue.
Fixes#3780
PiperOrigin-RevId: 329828404
The existing implementation for {G,S}etSockOpt take arguments of an
empty interface type which all types (implicitly) implement; any
type may be passed to the functions.
This change introduces marker interfaces for socket options that may be
set or queried which socket option types implement to ensure that invalid
types are caught at compile time. Different interfaces are used to allow
the compiler to enforce read-only or set-only socket options.
Fixes#3714.
RELNOTES: n/a
PiperOrigin-RevId: 328832161
In an upcoming CL, socket option types are made to implement a marker
interface with pointer receivers. Since this results in calling methods
of an interface with a pointer, we incur an allocation when attempting
to get an Endpoint's last error with the current implementation.
When calling the method of an interface, the compiler is unable to
determine what the interface implementation does with the pointer
(since calling a method on an interface uses virtual dispatch at runtime
so the compiler does not know what the interface method will do) so it
allocates on the heap to be safe incase an implementation continues to
hold the pointer after the functioon returns (the reference escapes the
scope of the object).
In the example below, the compiler does not know what b.foo does with
the reference to a it allocates a on the heap as the reference to a may
escape the scope of a.
```
var a int
var b someInterface
b.foo(&a)
```
This change removes the opportunity for that allocation.
RELNOTES: n/a
PiperOrigin-RevId: 328796559
iptables sockopts were kludged into an unnecessary check, this properly
relegates them to the {get,set}SockOptIP functions.
PiperOrigin-RevId: 328395135
When SO_LINGER option is enabled, the close will not return until all the
queued messages are sent and acknowledged for the socket or linger timeout is
reached. If the option is not set, close will return immediately. This option
is mainly supported for connection oriented protocols such as TCP.
PiperOrigin-RevId: 328350576
We still deviate a bit from linux in how long we will actually wait in
FIN-WAIT-2. Linux seems to cap it with TIME_WAIT_LEN and it's not completely
obvious as to why it's done that way. For now I think we can ignore that and
fix it if it really is an issue.
PiperOrigin-RevId: 328324922
