Files
visor/pkg/sentry/socket/socket.go
T
Rahat MahmoodandgVisor bot 15cfb5544f Return a well-defined socket address type from socket funtions.
Previously we were representing socket addresses as an interface{},
which allowed any type which could be binary.Marshal()ed to be used as
a socket address. This is fine when the address is passed to userspace
via the linux ABI, but is problematic when used from within the sentry
such as by networking procfs files.

PiperOrigin-RevId: 262460640
2019-08-08 16:50:33 -07:00

373 lines
12 KiB
Go

// Copyright 2018 The gVisor Authors.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
// Package socket provides the interfaces that need to be provided by socket
// implementations and providers, as well as per family demultiplexing of socket
// creation.
package socket
import (
"fmt"
"sync/atomic"
"syscall"
"gvisor.dev/gvisor/pkg/abi/linux"
"gvisor.dev/gvisor/pkg/binary"
"gvisor.dev/gvisor/pkg/sentry/context"
"gvisor.dev/gvisor/pkg/sentry/device"
"gvisor.dev/gvisor/pkg/sentry/fs"
"gvisor.dev/gvisor/pkg/sentry/fs/fsutil"
"gvisor.dev/gvisor/pkg/sentry/kernel"
ktime "gvisor.dev/gvisor/pkg/sentry/kernel/time"
"gvisor.dev/gvisor/pkg/sentry/socket/unix/transport"
"gvisor.dev/gvisor/pkg/sentry/usermem"
"gvisor.dev/gvisor/pkg/syserr"
"gvisor.dev/gvisor/pkg/tcpip"
)
// ControlMessages represents the union of unix control messages and tcpip
// control messages.
type ControlMessages struct {
Unix transport.ControlMessages
IP tcpip.ControlMessages
}
// Socket is the interface containing socket syscalls used by the syscall layer
// to redirect them to the appropriate implementation.
type Socket interface {
fs.FileOperations
// Connect implements the connect(2) linux syscall.
Connect(t *kernel.Task, sockaddr []byte, blocking bool) *syserr.Error
// Accept implements the accept4(2) linux syscall.
// Returns fd, real peer address length and error. Real peer address
// length is only set if len(peer) > 0.
Accept(t *kernel.Task, peerRequested bool, flags int, blocking bool) (int32, linux.SockAddr, uint32, *syserr.Error)
// Bind implements the bind(2) linux syscall.
Bind(t *kernel.Task, sockaddr []byte) *syserr.Error
// Listen implements the listen(2) linux syscall.
Listen(t *kernel.Task, backlog int) *syserr.Error
// Shutdown implements the shutdown(2) linux syscall.
Shutdown(t *kernel.Task, how int) *syserr.Error
// GetSockOpt implements the getsockopt(2) linux syscall.
GetSockOpt(t *kernel.Task, level int, name int, outPtr usermem.Addr, outLen int) (interface{}, *syserr.Error)
// SetSockOpt implements the setsockopt(2) linux syscall.
SetSockOpt(t *kernel.Task, level int, name int, opt []byte) *syserr.Error
// GetSockName implements the getsockname(2) linux syscall.
//
// addrLen is the address length to be returned to the application, not
// necessarily the actual length of the address.
GetSockName(t *kernel.Task) (addr linux.SockAddr, addrLen uint32, err *syserr.Error)
// GetPeerName implements the getpeername(2) linux syscall.
//
// addrLen is the address length to be returned to the application, not
// necessarily the actual length of the address.
GetPeerName(t *kernel.Task) (addr linux.SockAddr, addrLen uint32, err *syserr.Error)
// RecvMsg implements the recvmsg(2) linux syscall.
//
// senderAddrLen is the address length to be returned to the application,
// not necessarily the actual length of the address.
//
// flags control how RecvMsg should be completed. msgFlags indicate how
// the RecvMsg call was completed. Note that control message truncation
// may still be required even if the MSG_CTRUNC bit is not set in
// msgFlags. In that case, the caller should set MSG_CTRUNC appropriately.
//
// If err != nil, the recv was not successful.
RecvMsg(t *kernel.Task, dst usermem.IOSequence, flags int, haveDeadline bool, deadline ktime.Time, senderRequested bool, controlDataLen uint64) (n int, msgFlags int, senderAddr linux.SockAddr, senderAddrLen uint32, controlMessages ControlMessages, err *syserr.Error)
// SendMsg implements the sendmsg(2) linux syscall. SendMsg does not take
// ownership of the ControlMessage on error.
//
// If n > 0, err will either be nil or an error from t.Block.
SendMsg(t *kernel.Task, src usermem.IOSequence, to []byte, flags int, haveDeadline bool, deadline ktime.Time, controlMessages ControlMessages) (n int, err *syserr.Error)
// SetRecvTimeout sets the timeout (in ns) for recv operations. Zero means
// no timeout, and negative means DONTWAIT.
SetRecvTimeout(nanoseconds int64)
// RecvTimeout gets the current timeout (in ns) for recv operations. Zero
// means no timeout, and negative means DONTWAIT.
RecvTimeout() int64
// SetSendTimeout sets the timeout (in ns) for send operations. Zero means
// no timeout, and negative means DONTWAIT.
SetSendTimeout(nanoseconds int64)
// SendTimeout gets the current timeout (in ns) for send operations. Zero
// means no timeout, and negative means DONTWAIT.
SendTimeout() int64
// State returns the current state of the socket, as represented by Linux in
// procfs. The returned state value is protocol-specific.
State() uint32
// Type returns the family, socket type and protocol of the socket.
Type() (family int, skType linux.SockType, protocol int)
}
// Provider is the interface implemented by providers of sockets for specific
// address families (e.g., AF_INET).
type Provider interface {
// Socket creates a new socket.
//
// If a nil Socket _and_ a nil error is returned, it means that the
// protocol is not supported. A non-nil error should only be returned
// if the protocol is supported, but an error occurs during creation.
Socket(t *kernel.Task, stype linux.SockType, protocol int) (*fs.File, *syserr.Error)
// Pair creates a pair of connected sockets.
//
// See Socket for error information.
Pair(t *kernel.Task, stype linux.SockType, protocol int) (*fs.File, *fs.File, *syserr.Error)
}
// families holds a map of all known address families and their providers.
var families = make(map[int][]Provider)
// RegisterProvider registers the provider of a given address family so that
// sockets of that type can be created via socket() and/or socketpair()
// syscalls.
func RegisterProvider(family int, provider Provider) {
families[family] = append(families[family], provider)
}
// New creates a new socket with the given family, type and protocol.
func New(t *kernel.Task, family int, stype linux.SockType, protocol int) (*fs.File, *syserr.Error) {
for _, p := range families[family] {
s, err := p.Socket(t, stype, protocol)
if err != nil {
return nil, err
}
if s != nil {
t.Kernel().RecordSocket(s)
return s, nil
}
}
return nil, syserr.ErrAddressFamilyNotSupported
}
// Pair creates a new connected socket pair with the given family, type and
// protocol.
func Pair(t *kernel.Task, family int, stype linux.SockType, protocol int) (*fs.File, *fs.File, *syserr.Error) {
providers, ok := families[family]
if !ok {
return nil, nil, syserr.ErrAddressFamilyNotSupported
}
for _, p := range providers {
s1, s2, err := p.Pair(t, stype, protocol)
if err != nil {
return nil, nil, err
}
if s1 != nil && s2 != nil {
k := t.Kernel()
k.RecordSocket(s1)
k.RecordSocket(s2)
return s1, s2, nil
}
}
return nil, nil, syserr.ErrSocketNotSupported
}
// NewDirent returns a sockfs fs.Dirent that resides on device d.
func NewDirent(ctx context.Context, d *device.Device) *fs.Dirent {
ino := d.NextIno()
iops := &fsutil.SimpleFileInode{
InodeSimpleAttributes: fsutil.NewInodeSimpleAttributes(ctx, fs.FileOwnerFromContext(ctx), fs.FilePermissions{
User: fs.PermMask{Read: true, Write: true},
}, linux.SOCKFS_MAGIC),
}
inode := fs.NewInode(ctx, iops, fs.NewPseudoMountSource(ctx), fs.StableAttr{
Type: fs.Socket,
DeviceID: d.DeviceID(),
InodeID: ino,
BlockSize: usermem.PageSize,
})
// Dirent name matches net/socket.c:sockfs_dname.
return fs.NewDirent(ctx, inode, fmt.Sprintf("socket:[%d]", ino))
}
// SendReceiveTimeout stores timeouts for send and receive calls.
//
// It is meant to be embedded into Socket implementations to help satisfy the
// interface.
//
// Care must be taken when copying SendReceiveTimeout as it contains atomic
// variables.
//
// +stateify savable
type SendReceiveTimeout struct {
// send is length of the send timeout in nanoseconds.
//
// send must be accessed atomically.
send int64
// recv is length of the receive timeout in nanoseconds.
//
// recv must be accessed atomically.
recv int64
}
// SetRecvTimeout implements Socket.SetRecvTimeout.
func (to *SendReceiveTimeout) SetRecvTimeout(nanoseconds int64) {
atomic.StoreInt64(&to.recv, nanoseconds)
}
// RecvTimeout implements Socket.RecvTimeout.
func (to *SendReceiveTimeout) RecvTimeout() int64 {
return atomic.LoadInt64(&to.recv)
}
// SetSendTimeout implements Socket.SetSendTimeout.
func (to *SendReceiveTimeout) SetSendTimeout(nanoseconds int64) {
atomic.StoreInt64(&to.send, nanoseconds)
}
// SendTimeout implements Socket.SendTimeout.
func (to *SendReceiveTimeout) SendTimeout() int64 {
return atomic.LoadInt64(&to.send)
}
// GetSockOptEmitUnimplementedEvent emits unimplemented event if name is valid.
// It contains names that are valid for GetSockOpt when level is SOL_SOCKET.
func GetSockOptEmitUnimplementedEvent(t *kernel.Task, name int) {
switch name {
case linux.SO_ACCEPTCONN,
linux.SO_BPF_EXTENSIONS,
linux.SO_COOKIE,
linux.SO_DOMAIN,
linux.SO_ERROR,
linux.SO_GET_FILTER,
linux.SO_INCOMING_NAPI_ID,
linux.SO_MEMINFO,
linux.SO_PEERCRED,
linux.SO_PEERGROUPS,
linux.SO_PEERNAME,
linux.SO_PEERSEC,
linux.SO_PROTOCOL,
linux.SO_SNDLOWAT,
linux.SO_TYPE:
t.Kernel().EmitUnimplementedEvent(t)
default:
emitUnimplementedEvent(t, name)
}
}
// SetSockOptEmitUnimplementedEvent emits unimplemented event if name is valid.
// It contains names that are valid for SetSockOpt when level is SOL_SOCKET.
func SetSockOptEmitUnimplementedEvent(t *kernel.Task, name int) {
switch name {
case linux.SO_ATTACH_BPF,
linux.SO_ATTACH_FILTER,
linux.SO_ATTACH_REUSEPORT_CBPF,
linux.SO_ATTACH_REUSEPORT_EBPF,
linux.SO_CNX_ADVICE,
linux.SO_DETACH_FILTER,
linux.SO_RCVBUFFORCE,
linux.SO_SNDBUFFORCE:
t.Kernel().EmitUnimplementedEvent(t)
default:
emitUnimplementedEvent(t, name)
}
}
// emitUnimplementedEvent emits unimplemented event if name is valid. It
// contains names that are common between Get and SetSocketOpt when level is
// SOL_SOCKET.
func emitUnimplementedEvent(t *kernel.Task, name int) {
switch name {
case linux.SO_BINDTODEVICE,
linux.SO_BROADCAST,
linux.SO_BSDCOMPAT,
linux.SO_BUSY_POLL,
linux.SO_DEBUG,
linux.SO_DONTROUTE,
linux.SO_INCOMING_CPU,
linux.SO_KEEPALIVE,
linux.SO_LINGER,
linux.SO_LOCK_FILTER,
linux.SO_MARK,
linux.SO_MAX_PACING_RATE,
linux.SO_NOFCS,
linux.SO_NO_CHECK,
linux.SO_OOBINLINE,
linux.SO_PASSCRED,
linux.SO_PASSSEC,
linux.SO_PEEK_OFF,
linux.SO_PRIORITY,
linux.SO_RCVBUF,
linux.SO_RCVLOWAT,
linux.SO_RCVTIMEO,
linux.SO_REUSEADDR,
linux.SO_REUSEPORT,
linux.SO_RXQ_OVFL,
linux.SO_SELECT_ERR_QUEUE,
linux.SO_SNDBUF,
linux.SO_SNDTIMEO,
linux.SO_TIMESTAMP,
linux.SO_TIMESTAMPING,
linux.SO_TIMESTAMPNS,
linux.SO_TXTIME,
linux.SO_WIFI_STATUS,
linux.SO_ZEROCOPY:
t.Kernel().EmitUnimplementedEvent(t)
}
}
// UnmarshalSockAddr unmarshals memory representing a struct sockaddr to one of
// the ABI socket address types.
//
// Precondition: data must be long enough to represent a socket address of the
// given family.
func UnmarshalSockAddr(family int, data []byte) linux.SockAddr {
switch family {
case syscall.AF_INET:
var addr linux.SockAddrInet
binary.Unmarshal(data[:syscall.SizeofSockaddrInet4], usermem.ByteOrder, &addr)
return &addr
case syscall.AF_INET6:
var addr linux.SockAddrInet6
binary.Unmarshal(data[:syscall.SizeofSockaddrInet6], usermem.ByteOrder, &addr)
return &addr
case syscall.AF_UNIX:
var addr linux.SockAddrUnix
binary.Unmarshal(data[:syscall.SizeofSockaddrUnix], usermem.ByteOrder, &addr)
return &addr
case syscall.AF_NETLINK:
var addr linux.SockAddrNetlink
binary.Unmarshal(data[:syscall.SizeofSockaddrNetlink], usermem.ByteOrder, &addr)
return &addr
default:
panic(fmt.Sprintf("Unsupported socket family %v", family))
}
}