visor/pkg/sentry/kernel/seccomp.go

// Copyright 2018 The gVisor Authors.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

package kernel

import (
	"golang.org/x/sys/unix"
	"gvisor.dev/gvisor/pkg/abi/linux"
	"gvisor.dev/gvisor/pkg/bpf"
	"gvisor.dev/gvisor/pkg/errors/linuxerr"
	"gvisor.dev/gvisor/pkg/hostarch"
	"gvisor.dev/gvisor/pkg/sentry/arch"
)

const maxSyscallFilterInstructions = 1 << 15

// dataAsBPFInput returns a serialized BPF program, only valid on the current task
// goroutine.
//
// Note: this is called for every syscall, which is a very hot path.
func dataAsBPFInput(t *Task, d *linux.SeccompData) bpf.Input {
	buf := t.CopyScratchBuffer(d.SizeBytes())
	d.MarshalUnsafe(buf)
	return bpf.InputBytes{
		Data: buf,
		// Go-marshal always uses the native byte order.
		Order: hostarch.ByteOrder,
	}
}

func seccompSiginfo(t *Task, errno, sysno int32, ip hostarch.Addr) *linux.SignalInfo {
	si := &linux.SignalInfo{
		Signo: int32(linux.SIGSYS),
		Errno: errno,
		Code:  linux.SYS_SECCOMP,
	}
	si.SetCallAddr(uint64(ip))
	si.SetSyscall(sysno)
	si.SetArch(t.SyscallTable().AuditNumber)
	return si
}

// checkSeccompSyscall applies the task's seccomp filters before the execution
// of syscall sysno at instruction pointer ip. (These parameters must be passed
// in because vsyscalls do not use the values in t.Arch().)
//
// Preconditions: The caller must be running on the task goroutine.
func (t *Task) checkSeccompSyscall(sysno int32, args arch.SyscallArguments, ip hostarch.Addr) linux.BPFAction {
	result := linux.BPFAction(t.evaluateSyscallFilters(sysno, args, ip))
	action := result & linux.SECCOMP_RET_ACTION
	switch action {
	case linux.SECCOMP_RET_TRAP:
		// "Results in the kernel sending a SIGSYS signal to the triggering
		// task without executing the system call. ... The SECCOMP_RET_DATA
		// portion of the return value will be passed as si_errno." -
		// Documentation/prctl/seccomp_filter.txt
		t.SendSignal(seccompSiginfo(t, int32(result.Data()), sysno, ip))
		// "The return value register will contain an arch-dependent value." In
		// practice, it's ~always the syscall number.
		t.Arch().SetReturn(uintptr(sysno))

	case linux.SECCOMP_RET_ERRNO:
		// "Results in the lower 16-bits of the return value being passed to
		// userland as the errno without executing the system call."
		t.Arch().SetReturn(-uintptr(result.Data()))

	case linux.SECCOMP_RET_TRACE:
		// "When returned, this value will cause the kernel to attempt to
		// notify a ptrace()-based tracer prior to executing the system call.
		// If there is no tracer present, -ENOSYS is returned to userland and
		// the system call is not executed."
		if !t.ptraceSeccomp(result.Data()) {
			// This useless-looking temporary is needed because Go.
			tmp := uintptr(unix.ENOSYS)
			t.Arch().SetReturn(-tmp)
			return linux.SECCOMP_RET_ERRNO
		}

	case linux.SECCOMP_RET_ALLOW:
		// "Results in the system call being executed."

	case linux.SECCOMP_RET_KILL_THREAD:
		// "Results in the task exiting immediately without executing the
		// system call. The exit status of the task will be SIGSYS, not
		// SIGKILL."

	default:
		// consistent with Linux
		return linux.SECCOMP_RET_KILL_THREAD
	}
	return action
}

func (t *Task) evaluateSyscallFilters(sysno int32, args arch.SyscallArguments, ip hostarch.Addr) uint32 {
	data := linux.SeccompData{
		Nr:                 sysno,
		Arch:               t.image.st.AuditNumber,
		InstructionPointer: uint64(ip),
	}
	// data.args is []uint64 and args is []arch.SyscallArgument (uintptr), so
	// we can't do any slicing tricks or even use copy/append here.
	for i, arg := range args {
		if i >= len(data.Args) {
			break
		}
		data.Args[i] = arg.Uint64()
	}
	input := dataAsBPFInput(t, &data)

	ret := uint32(linux.SECCOMP_RET_ALLOW)
	f := t.syscallFilters.Load()
	if f == nil {
		return ret
	}

	// "Every filter successfully installed will be evaluated (in reverse
	// order) for each system call the task makes." - kernel/seccomp.c
	for i := len(f.([]bpf.Program)) - 1; i >= 0; i-- {
		thisRet, err := bpf.Exec(f.([]bpf.Program)[i], input)
		if err != nil {
			t.Debugf("seccomp-bpf filter %d returned error: %v", i, err)
			thisRet = uint32(linux.SECCOMP_RET_KILL_THREAD)
		}
		// "If multiple filters exist, the return value for the evaluation of a
		// given system call will always use the highest precedent value." -
		// Documentation/prctl/seccomp_filter.txt
		//
		// (Note that this contradicts prctl(2): "If the filters permit prctl()
		// calls, then additional filters can be added; they are run in order
		// until the first non-allow result is seen." prctl(2) is incorrect.)
		//
		// "The ordering ensures that a min_t() over composed return values
		// always selects the least permissive choice." -
		// include/uapi/linux/seccomp.h
		if (thisRet & linux.SECCOMP_RET_ACTION) < (ret & linux.SECCOMP_RET_ACTION) {
			ret = thisRet
		}
	}

	return ret
}

// AppendSyscallFilter adds BPF program p as a system call filter.
//
// Preconditions: The caller must be running on the task goroutine.
func (t *Task) AppendSyscallFilter(p bpf.Program, syncAll bool) error {
	// While syscallFilters are an atomic.Value we must take the mutex to prevent
	// our read-copy-update from happening while another task is syncing syscall
	// filters to us, this keeps the filters in a consistent state.
	t.tg.signalHandlers.mu.Lock()
	defer t.tg.signalHandlers.mu.Unlock()

	// Cap the combined length of all syscall filters (plus a penalty of 4
	// instructions per filter beyond the first) to maxSyscallFilterInstructions.
	// This restriction is inherited from Linux.
	totalLength := p.Length()
	var newFilters []bpf.Program

	if sf := t.syscallFilters.Load(); sf != nil {
		oldFilters := sf.([]bpf.Program)
		for _, f := range oldFilters {
			totalLength += f.Length() + 4
		}
		newFilters = append(newFilters, oldFilters...)
	}

	if totalLength > maxSyscallFilterInstructions {
		return linuxerr.ENOMEM
	}

	newFilters = append(newFilters, p)
	t.syscallFilters.Store(newFilters)

	if syncAll {
		// Note: No new privs is always assumed to be set.
		for ot := t.tg.tasks.Front(); ot != nil; ot = ot.Next() {
			if ot != t {
				var copiedFilters []bpf.Program
				copiedFilters = append(copiedFilters, newFilters...)
				ot.syscallFilters.Store(copiedFilters)
			}
		}
	}

	return nil
}

// SeccompMode returns a SECCOMP_MODE_* constant indicating the task's current
// seccomp syscall filtering mode, appropriate for both prctl(PR_GET_SECCOMP)
// and /proc/[pid]/status.
func (t *Task) SeccompMode() int {
	f := t.syscallFilters.Load()
	if f != nil && len(f.([]bpf.Program)) > 0 {
		return linux.SECCOMP_MODE_FILTER
	}
	return linux.SECCOMP_MODE_NONE
}