### Summary
With codesigning on Mac, Windows and Linux, we should be able to safely
remove `features.rmcp_client` and `use_experimental_use_rmcp_client`
check from the codebase now.
## TUI2: Normalize Mouse Scroll Input Across Terminals (Wheel +
Trackpad)
This changes TUI2 scrolling to a stream-based model that normalizes
terminal scroll event density into consistent wheel behavior (default:
~3 transcript lines per physical wheel notch) while keeping trackpad
input higher fidelity via fractional accumulation.
Primary code: `codex-rs/tui2/src/tui/scrolling/mouse.rs`
Doc of record (model + probe-derived data):
`codex-rs/tui2/docs/scroll_input_model.md`
### Why
Terminals encode both mouse wheels and trackpads as discrete scroll
up/down events with direction but no magnitude, and they vary widely in
how many raw events they emit per physical wheel notch (commonly 1, 3,
or 9+). Timing alone doesn’t reliably distinguish wheel vs trackpad, so
cadence-based heuristics are unstable across terminals/hardware.
This PR treats scroll input as short *streams* separated by silence or
direction flips, normalizes raw event density into tick-equivalents,
coalesces redraws for dense streams, and exposes explicit config
overrides.
### What Changed
#### Scroll Model (TUI2)
- Stream detection
- Start a stream on the first scroll event.
- End a stream on an idle gap (`STREAM_GAP_MS`) or a direction flip.
- Normalization
- Convert raw events into tick-equivalents using per-terminal
`tui.scroll_events_per_tick`.
- Wheel-like vs trackpad-like behavior
- Wheel-like: fixed “classic” lines per wheel notch; flush immediately
for responsiveness.
- Trackpad-like: fractional accumulation + carry across stream
boundaries; coalesce flushes to ~60Hz to avoid floods and reduce “stop
lag / overshoot”.
- Trackpad divisor is intentionally capped: `min(scroll_events_per_tick,
3)` so terminals with dense wheel ticks (e.g. 9 events per notch) don’t
make trackpads feel artificially slow.
- Auto mode (default)
- Start conservatively as trackpad-like (avoid overshoot).
- Promote to wheel-like if the first tick-worth of events arrives
quickly.
- Fallback for 1-event-per-tick terminals (no tick-completion timing
signal).
#### Trackpad Acceleration
Some terminals produce relatively low vertical event density for
trackpad gestures, which makes large/faster swipes feel sluggish even
when small motions feel correct. To address that, trackpad-like streams
apply a bounded multiplier based on event count:
- `multiplier = clamp(1 + abs(events) / scroll_trackpad_accel_events,
1..scroll_trackpad_accel_max)`
The multiplier is applied to the trackpad stream’s computed line delta
(including carried fractional remainder). Defaults are conservative and
bounded.
#### Config Knobs (TUI2)
All keys live under `[tui]`:
- `scroll_wheel_lines`: lines per physical wheel notch (default: 3).
- `scroll_events_per_tick`: raw vertical scroll events per physical
wheel notch (terminal-specific default; fallback: 3).
- Wheel-like per-event contribution: `scroll_wheel_lines /
scroll_events_per_tick`.
- `scroll_trackpad_lines`: baseline trackpad sensitivity (default: 1).
- Trackpad-like per-event contribution: `scroll_trackpad_lines /
min(scroll_events_per_tick, 3)`.
- `scroll_trackpad_accel_events` / `scroll_trackpad_accel_max`: bounded
trackpad acceleration (defaults: 30 / 3).
- `scroll_mode = auto|wheel|trackpad`: force behavior or use the
heuristic (default: `auto`).
- `scroll_wheel_tick_detect_max_ms`: auto-mode promotion threshold (ms).
- `scroll_wheel_like_max_duration_ms`: auto-mode fallback for
1-event-per-tick terminals (ms).
- `scroll_invert`: invert scroll direction (applies to wheel +
trackpad).
Config docs: `docs/config.md` and field docs in
`codex-rs/core/src/config/types.rs`.
#### App Integration
- The app schedules follow-up ticks to close idle streams (via
`ScrollUpdate::next_tick_in` and `schedule_frame_in`) and finalizes
streams on draw ticks.
- `codex-rs/tui2/src/app.rs`
#### Docs
- Single doc of record describing the model + preserved probe
findings/spec:
- `codex-rs/tui2/docs/scroll_input_model.md`
#### Other (jj-only friendliness)
- `codex-rs/tui2/src/diff_render.rs`: prefer stable cwd-relative paths
when the file is under the cwd even if there’s no `.git`.
### Terminal Defaults
Per-terminal defaults are derived from scroll-probe logs (see doc).
Notable:
- Ghostty currently defaults to `scroll_events_per_tick = 3` even though
logs measured ~9 in one setup. This is a deliberate stopgap; if your
Ghostty build emits ~9 events per wheel notch, set:
```toml
[tui]
scroll_events_per_tick = 9
```
### Testing
- `just fmt`
- `just fix -p codex-core --allow-no-vcs`
- `cargo test -p codex-core --lib` (pass)
- `cargo test -p codex-tui2` (scroll tests pass; remaining failures are
known flaky VT100 color tests in `insert_history`)
### Review Focus
- Stream finalization + frame scheduling in `codex-rs/tui2/src/app.rs`.
- Auto-mode promotion thresholds and the 1-event-per-tick fallback
behavior.
- Trackpad divisor cap (`min(events_per_tick, 3)`) and acceleration
defaults.
- Ghostty default tradeoff (3 vs ~9) and whether we should change it.
`load_config_layers_state()` should load config from a
`.codex/config.toml` in any folder between the `cwd` for a thread and
the project root. Though in order to do that,
`load_config_layers_state()` needs to know what the `cwd` is, so this PR
does the work to thread the `cwd` through for existing callsites.
A notable exception is the `/config` endpoint in app server for which a
`cwd` is not guaranteed to be associated with the query, so the `cwd`
param is `Option<AbsolutePathBuf>` to account for this case.
The logic to make use of the `cwd` will be done in a follow-up PR.
# External (non-OpenAI) Pull Request Requirements
Before opening this Pull Request, please read the dedicated
"Contributing" markdown file or your PR may be closed:
https://github.com/openai/codex/blob/main/docs/contributing.md
If your PR conforms to our contribution guidelines, replace this text
with a detailed and high quality description of your changes.
Include a link to a bug report or enhancement request.
This adds support for `allowed_sandbox_modes` in `requirements.toml` and
provides legacy support for constraining sandbox modes in
`managed_config.toml`. This is converted to `Constrained<SandboxPolicy>`
in `ConfigRequirements` and applied to `Config` such that constraints
are enforced throughout the harness.
Note that, because `managed_config.toml` is deprecated, we do not add
support for the new `external-sandbox` variant recently introduced in
https://github.com/openai/codex/pull/8290. As noted, that variant is not
supported in `config.toml` today, but can be configured programmatically
via app server.
## Summary
- centralize file name derivation in codex-file-search
- reuse the helper in app-server fuzzy search to avoid duplicate logic
- add unit tests for file_name_from_path
## Testing
- cargo test -p codex-file-search
- cargo test -p codex-app-server
Problem
- Mouse wheel events were scheduling a redraw on every event, which
could backlog and create lag during fast scrolling.
Solution
- Schedule transcript scroll redraws with a short delay (16ms) so the
frame requester coalesces bursts into fewer draws.
Why
- Smooths rapid wheel scrolling while keeping the UI responsive.
Testing
- Manual: Scrolled in iTerm and Ghostty; no lag observed.
- `cargo clippy --fix --all-features --tests --allow-dirty
--allow-no-vcs -p codex-tui2`
This will make it easier to test for expected errors in unit tests since
we can compare based on the field values rather than the message (which
might change over time). See https://github.com/openai/codex/pull/8298
for an example.
It also ensures more consistency in the way a `ConstraintError` is
constructed.
Fixes#8214 by removing the '--staged' flag from the undo git restore
command. This ensures that while the working tree is reverted to the
snapshot state, the user's staged changes (index) are preserved,
preventing data loss. Also adds a regression test.
# External (non-OpenAI) Pull Request Requirements
Before opening this Pull Request, please read the dedicated
"Contributing" markdown file or your PR may be closed:
https://github.com/openai/codex/blob/main/docs/contributing.md
If your PR conforms to our contribution guidelines, replace this text
with a detailed and high quality description of your changes.
Include a link to a bug report or enhancement request.
We were assembling the skill roots in two different places, and the
admin root was missing in one of them. This change centralizes root
selection into a helper so both paths stay in sync.
James Peter