## Summary
There is a race condition in the way we poll if React is on the page and
when we actually clear this polling instance. When user navigates to a
different page, we will debounce a callback for 500ms, which will:
1. Cleanup previous React polling instance
2. Start a new React polling instance
Since the cleanup logic is debounced, there is a small chance that by
the time we are going to clean up this polling instance, it will be
`eval`-ed on the page, that is using React. For example, when user is
navigating from the page which doesn't have React running, to a page
that has React running.
Next, we incorrectly will try to mount React DevTools panels twice,
which will result into conflicts in the Store, and the error will be
shown to the user
## How did you test this change?
Since this is a race condition, it is hard to reproduce consistently,
but you can try this flow:
1. Open a page that is using React, open browser DevTools and React
DevTools components panel
2. Open a page that is NOT using React, like google.com, wait ~5 seconds
until you see `"Looks like this page doesn't have React, or it hasn't
been loaded yet"` message in RDT panel
3. Open a page that is using React, observe the error `"Uncaught Error:
Cannot add node "1" because a node with that id is already in the
Store."`
Couldn't been able to reproduce this with these changes.
- Made each workflow's name consistent
- Rename each workflow file with consistent naming scheme
- Promote flow-ci-ghaction to flow-ci
ghstack-source-id: 490b643dcd
Pull Request resolved: https://github.com/facebook/react/pull/30037
Copies the existing circleci workflow for checking the inlined Fizz
runtime into GitHub actions. I didn't remove the circleci job for now
just to check for parity.
ghstack-source-id: 09480b1a20
Pull Request resolved: https://github.com/facebook/react/pull/30035
This PR adds parallelism similar to our existing circleci setup for
running yarn tests with the various test params. It does this by
sharding tests into `$SHARD_COUNT` number of groups, then spawning a job
for each of them and using jest's built in `--shard` option.
Effectively this means that the job will spawn an additional (where `n`
is the number of test params)
`n * $SHARD_COUNT` number of jobs to run tests in parallel
for a total of `n + (n * $SHARD_COUNT)` jobs. This does mean the
GitHub UI at the bottom of each PR gets longer and unfortunately it's
not sorted in any way as far as I can tell. But if something goes wrong
it should still be easy to find out what the problem is.
The PR also changes the `ci` argument for jest-cli to be an enum instead
so the tests use all available workers in GitHub actions. This will have
to live around for a bit until we can fully migrate off of circleci.
ghstack-source-id: 08f2d16353
Pull Request resolved: https://github.com/facebook/react/pull/30033
Copies the existing circleci workflow for yarn test into GitHub
actions. I didn't remove the circleci job for now just to check for
parity.
Opted to keep the same hardcoded list of params rather than use GitHub's
matrix permutations since this was intentional in the circleci config.
ghstack-source-id: b77a091254
Pull Request resolved: https://github.com/facebook/react/pull/30032
Adds a fixture based on internal case where our current output is quite a bit more verbose than the original memoization. See the comment in the fixture for more about the heuristic we can apply.
ghstack-source-id: e637a38140
Pull Request resolved: https://github.com/facebook/react/pull/29998
Note: due to a bad rebase i included #29883 here. Both were stamped so i'm not gonna bother splitting it back up aain.
This PR includes two changes:
* First, allow `LoadLocal` to be reordered if a) the load occurs after the last write to a variable and b) the LoadLocal lvalue is used exactly once
* Uses a more optimal reordering for statement blocks, while keeping the existing approach for expression blocks.
In #29863 I tried to find a clean way to share code for emitting instructions between value blocks and regular blocks. The catch is that value blocks have special meaning for their final instruction — that's the value of the block — so reordering can't change the last instruction. However, in finding a clean way to share code for these two categories of code, i also inadvertently reduced the effectiveness of the optimization.
This PR updates to use different strategies for these two kinds of blocks: value blocks use the code from #29863 where we first emit all non-reorderable instructions in their original order, then try to emit reorderable values. The reason this is suboptimal, though, is that we want to move instructions closer to their dependencies so that they can invalidate (merge) together. Emitting the reorderable values last prevents this.
So for normal blocks, we now emit terminal operands first. This will invariably cause some of the non-reorderable instructions to be emitted, but it will intersperse reoderable instructions in between, right after their dependencies. This maximizes our ability to merge scopes.
I think the complexity cost of two strategies is worth the benefit, as evidenced by the reduced memo slots in the fixtures.
ghstack-source-id: ad3e516fa4
Pull Request resolved: https://github.com/facebook/react/pull/29882
Copies the existing circleci workflow for yarn flags into GitHub
actions. I didn't remove the circleci job for now just to check for
parity.
ghstack-source-id: 003f2a4796
Pull Request resolved: https://github.com/facebook/react/pull/30029
The existing flow-ci script makes some assumptions about running inside
of circleci for parallelization. This PR forks the script with very smal
ll tweaks to allow for a short name to be passed in as an argument.
These short names are discovered in a new GH job and then each one is
passed as an argument for parallelization
ghstack-source-id: dc85486388f74088c22b386b77b45996ef753f1a
Pull Request resolved: https://github.com/facebook/react/pull/30026
Copies the existing circleci workflow for flow into GitHub actions. I
didn't remove the circleci job for now just to check for parity.
ghstack-source-id: 59104902e48a2b520ea2971d99c061c74b03a1a0
Pull Request resolved: https://github.com/facebook/react/pull/30025
Copies the existing circleci workflow for linting into GitHub actions. I
didn't remove the circleci for now just to check for parity.
ghstack-source-id: a3754dcc3b
Pull Request resolved: https://github.com/facebook/react/pull/30023
Merges the existing config to the root one so we can have a single
configuration file. I've tried to keep the compiler config as much as
possible in this PR so that no formatting changes occur.
ghstack-source-id: 8bbfc9f269
Pull Request resolved: https://github.com/facebook/react/pull/30021
This PR extends the previous logic added in #29141 to also account for
other kinds of non-ascii characters such as `\n`. Because these control
characters are individual special characters (and not 2 characters `\`
and `n`) we match based on unicode which was already being checked for
non-Latin characters.
This allows control characters to continue to be compiled equivalently
to its original source if it was provided in a JsxExpressionContainer.
However note that this PR does not convert JSX attributes that are
StringLiterals to JsxExpressionContainer, to preserve the original
source code as it was written.
Alternatively we could always emit a JsxExpressionContainer if it was
used in the source and not try to down level it to some other node
kind. But since we already do this I opted to keep this behavior.
Partially addresses #29648.
ghstack-source-id: ecc61c9f0bece90d18623b3c570fea05fbcd811a
Pull Request resolved: https://github.com/facebook/react/pull/29997
Need to tighten up this a bit.
react-dom isomorphic currently depends on react-reconciler which is
mostly DCE but it's pulled in which makes it hard to make other bundling
changes.
ReactFlightServer can have a hard dependency on the module that imports
its internals since even if other internals are aliased it still always
needs the server one.
Now that the compiler directory has its own prettier config, we can
remove the prettierignore entry for compiler/ so it still runs in your
editor if you open the root directory
ghstack-source-id: 5e3bd597cf2f11a9931f084eb909ffd81ebdca81
Pull Request resolved: https://github.com/facebook/react/pull/29993
## Summary
Fix bundle type filtering logic to correctly handle array input in
argv.type and use some with includes for accurate filtering. This
addresses a TypeError encountered during yarn build-for-devtools-prod
and yarn build-for-devtools-dev commands.
## Motivation
The current implementation of the `shouldSkipBundle` function in
`scripts/rollup/build.js` has two issues:
1. **Incorrect array handling in
`parseRequestedNames`([#29613](https://github.com/facebook/react/issues/29613)):**
The function incorrectly wraps the `argv.type` value in an additional
array when it's already an array. This leads to a `TypeError:
names[i].split is not a function` when `parseRequestedNames` attempts to
split the nested array, as seen in this error message:
```
C:\Users\Administrator\Documents\새 폴더\react\scripts\rollup\build.js:76
let splitNames = names[i].split(',');
^
TypeError: names[i].split is not a function
```
This PR fixes this by correctly handling both string and array inputs in
`argv.type`:
```diff
- const requestedBundleTypes = argv.type
- ? parseRequestedNames([argv.type], 'uppercase')
+ const argvType = Array.isArray(argv.type) ? argv.type : [argv.type];
+ const requestedBundleTypes = argv.type
+ ? parseRequestedNames(argvType, 'uppercase')
```
2. **Inaccurate filtering logic in
`shouldSkipBundle`([#29614](https://github.com/facebook/react/issues/29614)):**
The function uses `Array.prototype.every` with `indexOf` to check if
**all** requested bundle types are missing in the current bundle type.
However, when multiple bundle types are requested (e.g., `['NODE',
'NODE_DEV']`), the function should skip a bundle only if **none** of the
requested types are present. The current implementation incorrectly
allows bundles that match any of the requested types.
To illustrate, consider the following example output:
```
requestedBundleTypes [ 'NODE', 'NODE_DEV' ]
bundleType NODE_DEV
isAskingForDifferentType false
requestedBundleTypes [ 'NODE', 'NODE_DEV' ]
bundleType NODE_PROD
isAskingForDifferentType false // Incorrect behavior
```
In this case, even though the bundle type is `NODE_PROD` and doesn't
include `NODE_DEV`, the bundle is not skipped due to the incorrect
logic.
This PR fixes this by replacing `every` with `some` and using `includes`
for a more accurate check:
```diff
- const isAskingForDifferentType = requestedBundleTypes.every(
- requestedType => bundleType.indexOf(requestedType) === -1
- );
+ const isAskingForDifferentType = requestedBundleTypes.some(
+ requestedType => !bundleType.includes(requestedType)
+ );
```
This ensures that the bundle is skipped only if **none** of the
requested types are found in the `bundleType`.
This PR addresses both of these issues to ensure correct bundle type
filtering in various build scenarios.
## How did you test this change?
1. **Verification of `requestedBundleTypes` usage in
`shouldSkipBundle`:**
* I manually tested the following scenarios:
* `yarn build`: Verified that `requestedBundleTypes` remains an empty
array, as expected.
* `yarn build-for-devtools`: Confirmed that `requestedBundleTypes` is
correctly set to `['NODE']`, as in the original implementation.
* `yarn build-for-devtools-dev`: This previously failed due to the
error. After the fix, I confirmed that `requestedBundleTypes` is now
correctly passed as `['NODE', 'NODE_DEV']`.
2. **Debugging of filtering logic in `shouldSkipBundle`:**
* I added the following logging statements to the `shouldSkipBundle`
function to observe its behavior during the build process:
```javascript
console.log('requestedBundleTypes', requestedBundleTypes);
console.log('bundleType', bundleType);
console.log('isAskingForDifferentType', isAskingForDifferentType);
```
* By analyzing the log output, I confirmed that the filtering logic now
correctly identifies when a bundle should be skipped based on the
requested types. This allowed me to verify that the fix enables building
specific target bundles as intended.
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
I have fixed an issue where the display of the HIR diff in the React
Compiler Playground was incorrect. The HIR diff is supposed to show the
pre-change state as the source, but currently, it is showing
EnvironmentConfig as the pre-change state. This PR corrects this by
setting the pre-change state to source instead of EnvironmentConfig.
## How did you test this change?
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
before:
after:
Somehow missed this while working on
https://github.com/facebook/react/pull/29869.
With these changes, manual inspection of the
`react_devtools_backend_compact.js` doesn't have any occurences of
`__IS_FIREFOX__` flag.
Only with the enableOwnerStacks flag (which is not on in www).
This is a new DEV-only API to be able to implement what we do for
console.error in user space.
This API does not actually include the current stack that you'd get from
`new Error().stack`. That you'd have to add yourself.
This adds the ability to have conditional development exports because we
plan on eventually having separate ESM builds that use the "development"
or "production" export conditions.
NOTE: This removes the export of `act` from `react` in prod (as opposed
to a function that throws) - inline with what we do with other
conditional exports.
## Summary
This is the pre-requisite for
https://github.com/facebook/react/pull/29231.
Current implementation of profiling hooks is only using
`performance.mark` and then makes `performance.clearMarks` call right
after it to free the memory. We've been relying on this assumption in
the tests that every mark is cleared by the time we check something.
https://github.com/facebook/react/pull/29231 adds `performance.measure`
calls and the `start` mark is not cleared until the corresponding `stop`
one is registered, and then they are cleared together.
## How did you test this change?
To test against React from source:
```
yarn test --build --project=devtools -r=experimental --ci
```
To test against React 18:
```
./scripts/circleci/download_devtools_regression_build.js 18.0 --replaceBuild
node ./scripts/jest/jest-cli.js --build --project devtools --release-channel=experimental --reactVersion 18.0 --ci
```
If a component uses the `useRef` hook directly then we type it's return
value as a ref. But if it's wrapped in a custom hook then we lose out on
this type information as the compiler doesn't look at the hook
definition. This has resulted in some false positives in our analysis
like the ones reported in #29160 and #29196.
This PR will treat objects named as `ref` or if their names end with the
substring `Ref`, and contain a property named `current`, as React refs.
```
const ref = useMyRef();
const myRef = useMyRef2();
useEffect(() => {
ref.current = ...;
myRef.current = ...;
})
```
In the above example, `ref` and `myRef` will be treated as React refs.
Updated version of #29758 removing `useFormState` since that was the
previous name for `useActionState`.
---------
Co-authored-by: Hieu Do <[email protected]>
Stacked on https://github.com/facebook/react/pull/29869.
## Summary
When using ANSI escape sequences, we construct a message in the
following way: `console.<method>('\x1b...%s\x1b[0m',
userspaceArgument1?, userspaceArgument2?, userspaceArgument3?, ...)`.
This won't dim all arguments, if user had something like `console.log(1,
2, 3)`, we would only apply it to `1`, since this is the first
arguments, so we need to:
- inline everything whats possible into a single string, while
preserving console substitutions defined by the user
- omit css and object substitutions, since we can't really inline them
and will delegate in to the environment
## How did you test this change?
Added some tests, manually inspected that it works well for web and
native cases.
Adds fixtures for `macro.namespace(...)` style invocations which we use internally in some cases instead of just `macro(...)`. I tried every example i could think of that could possibly break it (including basing one off of another fixture where we hit an invariant related due to a temporary being emitted for a method call), and they all worked. I just had to fix an existing bug where we early return in some cases instead of continuing, which is a holdover from when this pass was originally written as a ReactiveFunction visitor.
ghstack-source-id: c01f45b3ef6f42b6d1f1ff0508aea258000e0fce
Pull Request resolved: https://github.com/facebook/react/pull/29899
## Summary
Removes the usage of `consoleManagedByDevToolsDuringStrictMode` flag
from React DevTools backend, this is the only place in RDT where this
flag was used. The only remaining part is
[`ReactFiberDevToolsHook`](https://github.com/facebook/react/blob/dad3ed39ffbd025469cfe25930e8b092d4adbcea/packages/react-reconciler/src/ReactFiberDevToolsHook.js#L203),
so React renderers can start notifying DevTools when `render` runs in a
Strict Mode.
> TL;DR: it is broken, and we already incorrectly apply dimming, when
RDT frontend is not opened. Fixing in the next few changes, see next
steps.
Before explaining why I am removing this, some context is required. The
way RDT works is slightly different, based on the fact if RDT frontend
and RDT backend are actually connected:
1. For browser extension case, the Backend is a script, which is
injected by the extension when page is loaded and before React is
loaded. RDT Frontend is loaded together with the RDT panel in browser
DevTools, so ONLY when user actually opens the RDT panel.
2. For native case, RDT backend is shipped together with `react-native`
for DEV bundles. It is always injected before React is loaded. RDT
frontend is loaded only when user starts a standalone RDT app via `npx
react-devtools` or by opening React Native DevTools and then selecting
React DevTools panel.
When Frontend is not connected to the Backend, the only thing we have is
the `__REACT_DEVTOOLS_GLOBAL_HOOK__` — this thing inlines some APIs in
itself, so that it can work similarly when RDT Frontend is not even
opened. This is especially important for console logs, since they are
cached and stored, then later displayed to the user once the Console
panel is opened, but from RDT side, you want to modify these console
logs when they are emitted.
In order to do so, we [inline the console patching logic into the
hook](https://github.com/facebook/react/blob/a1c8c1c7c5cef3c0736cf92798ac9b7bff2d90bd/packages/react-devtools-shared/src/hook.js#L222-L319).
This implementation doesn't use the
`consoleManagedByDevToolsDuringStrictMode`. This means that if we enable
`consoleManagedByDevToolsDuringStrictMode` for Native right now, users
would see broken dimming in LogBox / Metro logs when RDT Frontend is not
opened.
Next steps:
1. Align this console patching implementation with the one in `hook.js`.
2. Make LogBox compatible with console stylings: both css and ASCII
escape symbols.
3. Ship new version of RDT with these changes.
4. Remove `consoleManagedByDevToolsDuringStrictMode` from
`ReactFiberDevToolsHook`, so this is rolled out for all renderers.
This adds few changes:
1. We are going to ship source maps only for 2 artifacts:
`installHook.js` and `react_devtools_backend_compact.js`, because it is
only these modules that can patch console and be visible to the user via
stack traces in console. We need to ship source maps to be able to use
`ignoreList` feature in source maps, so we can actually hide these from
stack traces.
| Before | After |
|--------|--------|
| 
| 
|
2. The `"sources"` field in source map will have relative urls listed,
instead of absolute with `webpack://` protocol. This will move the
sources to the `React Developer Tools` frame in `Sources` panel, instead
of `webpack://`.
| Before | After |
|--------|--------|
| 
| 
|
> [!NOTE]
> I still have 1 unresolved issue with shipping source maps in extension
build, and it is related to Firefox, which can't find them in the
extension bundle and returns 404, even though urls are relative and I
can actually open them via unique address like
`moz-extension://<extension-id>/build/intallHook.js.map` ¯\\\_(ツ)\_/¯
## Summary
Configures the React Native open source feature flags in preparation for
React Native 0.75, which will be upgraded to React 19.
## How did you test this change?
```
$ yarn test
$ yarn flow fabric
```
Adds a pass just after DCE to reorder safely reorderable instructions (jsx, primitives, globals) closer to where they are used, to allow other optimization passes to be more effective. Notably, the reordering allows scope merging to be more effective, since that pass relies on two scopes not having intervening instructions — in many cases we can now reorder such instructions out of the way and unlock merging, as demonstrated in the changed fixtures.
The algorithm itself is described in the docblock.
note: This is a cleaned up version of #29579 that is ready for review.
ghstack-source-id: c54a806cad7aefba4ac1876c9fd9b25f9177e95a
Pull Request resolved: https://github.com/facebook/react/pull/29863
Updates our scope merging pass to allow more types of instructions to intervene btw scopes. This includes all the non-allocating kinds of nodes that are considered reorderable in #29863. It's already safe to merge scopes with these instructions — we only merge if the lvalue is not used past the next scope. Additionally, without changing this pass reordering isn't very effective, since we would reorder to add these types of intervening instructions and then not be able to merge scopes.
Sequencing this first helps to see the win just from reordering alone.
ghstack-source-id: 79263576d8eaeb45ef4d1ec4951478459853a287
Pull Request resolved: https://github.com/facebook/react/pull/29881
<!--
Thanks for submitting a pull request!
We appreciate you spending the time to work on these changes. Please
provide enough information so that others can review your pull request.
The three fields below are mandatory.
Before submitting a pull request, please make sure the following is
done:
1. Fork [the repository](https://github.com/facebook/react) and create
your branch from `main`.
2. Run `yarn` in the repository root.
3. If you've fixed a bug or added code that should be tested, add tests!
4. Ensure the test suite passes (`yarn test`). Tip: `yarn test --watch
TestName` is helpful in development.
5. Run `yarn test --prod` to test in the production environment. It
supports the same options as `yarn test`.
6. If you need a debugger, run `yarn test --debug --watch TestName`,
open `chrome://inspect`, and press "Inspect".
7. Format your code with
[prettier](https://github.com/prettier/prettier) (`yarn prettier`).
8. Make sure your code lints (`yarn lint`). Tip: `yarn linc` to only
check changed files.
9. Run the [Flow](https://flowtype.org/) type checks (`yarn flow`).
10. If you haven't already, complete the CLA.
Learn more about contributing:
https://reactjs.org/docs/how-to-contribute.html
-->
## Summary
<!--
Explain the **motivation** for making this change. What existing problem
does the pull request solve?
-->
In the Fabric renderer in React Native, we only use the HostContext to
issue soft errors in __DEV__ bundles when attempting to add a raw text
child to a node that may not support them. Moving the logic to set this
context to __DEV__ bundles only unblocks more expensive methods for
resolving whether a parent context supports raw text children, like
resolving this information from `getViewConfigForType`.
## How did you test this change?
<!--
Demonstrate the code is solid. Example: The exact commands you ran and
their output, screenshots / videos if the pull request changes the user
interface.
How exactly did you verify that your PR solves the issue you wanted to
solve?
If you leave this empty, your PR will very likely be closed.
-->
yarn test (--prod)
sanitize javascript: urls for <object> tags
React 19 added sanitization for `javascript:` URLs for `href` properties
on various tags. This PR also adds that sanitization for `<object>` tags
as well that Firefox otherwise executes.
