When execveat is called on an interpreter script, the symlink count for
resolving the script path should be separate from the count for resolving the
the corresponding interpreter. An ELOOP error should not occur if we do not hit
the symlink limit along any individual path, even if the total number of
symlinks encountered exceeds the limit.
Closes#574
PiperOrigin-RevId: 277358474
Set the snd/rcv buffer sizes so that the test is deterministic and runs in a
reasonable amount of time. It also ensures that we disable any auto-tuning of
the send/receive buffer which may happen.
PiperOrigin-RevId: 277337232
This change helps support iterating over an NDP options buffer so that
implementations can handle all the NDP options present in an NDP packet.
Note, this change does not yet actually handle these options, it just provides
the tools to do so (in preparation for NDP's Prefix, Parameter, and a complete
implementation of Neighbor Discovery).
Tests: Unittests to make sure we can iterate over a valid NDP options buffer
that may contain multiple options. Also tests to check an iterator before
using it to see if the NDP options buffer is malformed.
PiperOrigin-RevId: 277312487
When an interpreter script is opened with O_CLOEXEC and the resulting fd is
passed into execveat, an ENOENT error should occur (the script would otherwise
be inaccessible to the interpreter). This matches the actual behavior of
Linux's execveat.
PiperOrigin-RevId: 277306680
This change supports using a user supplied TCP MSS for new active TCP
connections. Note, the user supplied MSS must be less than or equal to the
maximum possible MSS for a TCP connection's route. If it is greater than the
maximum possible MSS, the maximum possible MSS will be used as the connection's
MSS instead.
This change does not use this user supplied MSS for connections accepted from
listening sockets - that will come in a later change.
Test: Test that outgoing TCP SYN segments contain a TCP MSS option with the user
supplied MSS if it is not greater than the maximum possible MSS for the route.
PiperOrigin-RevId: 277185125
Since the syscall.Stat_t.Nlink is defined as different types on
amd64 and arm64(uint64 and uint32 respectively), we need to cast
them to a unified uint64 type in gVisor code.
Signed-off-by: Haibo Xu <[email protected]>
Change-Id: I7542b99b195c708f3fc49b1cbe6adebdd2f6e96b
This change simplifies the function signatures of functions related to loading
executables, such as LoadTaskImage, Load, loadBinary.
PiperOrigin-RevId: 276821187
This change validates the ICMPv6 checksum field before further processing an
ICMPv6 packet.
Tests: Unittests to make sure that only ICMPv6 packets with a valid checksum
are accepted/processed. Existing tests using checker.ICMPv6 now also check the
ICMPv6 checksum field.
PiperOrigin-RevId: 276779148
This change is in preparation for NDP Prefix Discovery and SLAAC where the stack
will need to handle NDP Prefix Information options.
Tests: Test that given an NDP Prefix Information option buffer, correct values
are returned by the field getters.
PiperOrigin-RevId: 276594592
container.startContainers() cannot be called twice in a test
(e.g. TestMultiContainerLoadSandbox) because the cleanup
function deletes the rootDir, together with information from
all other containers that may exist.
PiperOrigin-RevId: 276591806
The amss field in the tcpip.tcp.handshake was not used anywhere. Removed it to
not cause confusion with the amss field in the tcpip.tcp.endpoint struct, which
was documented to be used (and is actually being used) for the same purpose.
PiperOrigin-RevId: 276577088
This change makes it so that NDP work is done using the per-interface NDP
configurations instead of the stack-wide default NDP configurations to correctly
implement RFC 4861 section 6.3.2 (note here, a host is a single NIC operating
as a host device), and RFC 4862 section 5.1.
Test: Test that we can set NDP configurations on a per-interface basis without
affecting the configurations of other interfaces or the stack-wide default. Also
make sure that after the configurations are updated, the updated configurations
are used for NDP processes (e.g. Duplicate Address Detection).
PiperOrigin-RevId: 276525661
Use fd.next to store the iteration start position, which can be used to accelerate allocating new FDs.
And adding the corresponding gtest benchmark to measure performance.
@tanjianfeng
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/758 from DarcySail:master 96685ec7886dfe1a64988406831d3bc002b438cc
PiperOrigin-RevId: 276351250
This change introduces a new interface, stack.NDPDispatcher. It can be
implemented by the netstack integrator to receive NDP related events. As of this
change, only DAD related events are supported.
Tests: Existing tests were modified to use the NDPDispatcher's DAD events for
DAD tests where it needed to wait for DAD completing (failing and resolving).
PiperOrigin-RevId: 276338733
This change is in preparation for NDP Router Discovery where the stack will need
to handle NDP Router Advertisments.
Tests: Test that given an NDP Router Advertisement buffer (body of an ICMPv6
packet, correct values are returned by the field getters).
PiperOrigin-RevId: 276146817
This change makes sure that when an address which is already known by a NIC and
has kind = permanentExpired gets promoted to permanent, the new
PrimaryEndpointBehavior is respected.
PiperOrigin-RevId: 276136317
Right now, we send each tcp packet separately, we call one system
call per-packet. This patch allows to generate multiple tcp packets
and send them by sendmmsg.
The arguable part of this CL is a way how to handle multiple headers.
This CL adds the next field to the Prepandable buffer.
Nginx test results:
Server Software: nginx/1.15.9
Server Hostname: 10.138.0.2
Server Port: 8080
Document Path: /10m.txt
Document Length: 10485760 bytes
w/o gso:
Concurrency Level: 5
Time taken for tests: 5.491 seconds
Complete requests: 100
Failed requests: 0
Total transferred: 1048600200 bytes
HTML transferred: 1048576000 bytes
Requests per second: 18.21 [#/sec] (mean)
Time per request: 274.525 [ms] (mean)
Time per request: 54.905 [ms] (mean, across all concurrent requests)
Transfer rate: 186508.03 [Kbytes/sec] received
sw-gso:
Concurrency Level: 5
Time taken for tests: 3.852 seconds
Complete requests: 100
Failed requests: 0
Total transferred: 1048600200 bytes
HTML transferred: 1048576000 bytes
Requests per second: 25.96 [#/sec] (mean)
Time per request: 192.576 [ms] (mean)
Time per request: 38.515 [ms] (mean, across all concurrent requests)
Transfer rate: 265874.92 [Kbytes/sec] received
w/o gso:
$ ./tcp_benchmark --client --duration 15 --ideal
[SUM] 0.0-15.1 sec 2.20 GBytes 1.25 Gbits/sec
software gso:
$ tcp_benchmark --client --duration 15 --ideal --gso $((1<<16)) --swgso
[SUM] 0.0-15.1 sec 3.99 GBytes 2.26 Gbits/sec
PiperOrigin-RevId: 276112677
This change adds support for optionally auto-generating an IPv6 link-local
address based on the NIC's MAC Address on NIC enable.
Note, this change will not break existing uses of netstack as the default
configuration for the stack options is set in such a way that a link-local
address will not be auto-generated unless the stack is explicitly configured.
See `stack.Options` for more details. Specifically, see
`stack.Options.AutoGenIPv6LinkLocal`.
Tests: Tests to make sure that the IPb6 link-local address is only
auto-generated if the stack is specifically configured to do so. Also tests to
make sure that an auto-generated address goes through the DAD process.
PiperOrigin-RevId: 276059813
Like (AF_INET, SOCK_RAW) sockets, AF_PACKET sockets require CAP_NET_RAW. With
runsc, you'll need to pass `--net-raw=true` to enable them.
Binding isn't supported yet.
PiperOrigin-RevId: 275909366
This change fixes several issues with the fsgofer host UDS support. Notably, it
adds support for SOCK_SEQPACKET and SOCK_DGRAM sockets [1]. It also fixes
unsafe use of unet.Socket, which could cause a panic if Socket.FD is called
when err != nil, and calls to Socket.FD with nothing to prevent the garbage
collector from destroying and closing the socket.
A set of tests is added to exercise host UDS access. This required extracting
most of the syscall test runner into a library that can be used by custom
tests.
Updates #235
Updates #1003
[1] N.B. SOCK_DGRAM sockets are likely not particularly useful, as a server can
only reply to a client that binds first. We don't allow bind, so these are
unlikely to be used.
PiperOrigin-RevId: 275558502
* Use mknod instead of open&close to create an empty file.
* Limit a number of files to (1<<16) instead of 100K.
In this case, a test set is (1, 8, 64, 512, 4K, 32K, 64K) instead of (1, 8, 64,
512, 4K, 32K, 98K). I think it is easier to compare results for 32K and 64K
than 32K and 98K. And results for 98K doesn't give us more information than for
54K.
PiperOrigin-RevId: 275552507
It is quite legal to send from the ANY address (it is required for
DHCP). I can't figure out why the broadcast address was included here,
so removing that as well.
PiperOrigin-RevId: 275541954
